Fits 2015-2017 Ford Mustang GT Coupe and Convertibles with 5.0L engine.
This new Flowmaster no resonator kit is for 2015-2017 Ford Mustang GT coupe and convertibles with the 5.0L engine, and is a great way to increase the sound level of your car while making maximum power. These Scavenger Series X-pipe assemblies can be used with the factory rear muffler sections, or with one of our Flowmaster, or Hurst Elite Series axle-back systems. The kit is constructed from 2.50-inch mandrel-bent stainless steel tubing with all hardware included, and is covered by our Lifetime Limited Warranty.
- Eliminates Factory Resonator for Increase Power and Sound
- 2.50-inch Mandrel-bent Stainless Steel Construction
- Dyno Tuned For Maximum Performance
- Includes Clamps and Hardware
- Lifetime Limited Warranty
- Flowmaster Quality
Information:
Fits 2015-2017 Ford Mustang GT Coupe and Convertibles with 5.0L engine.
Application Summary:
| Year |
Make/Model |
| 2015-2017 |
Ford Mustang |
| Attributes |
| ASIN |
B00ZUDNHI4 |
| Automotive Item Grade |
High Performance, High Performance |
| Brand |
Flowmaster, Flowmaster |
| Bullet Point #1 |
Stainless Steel Construction |
| Bullet Point #2 |
Dyno Tuned For Maximum Performance |
| Bullet Point #3 |
Mandrel Bent Tubing |
| Bullet Point #4 |
Made in the USA |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Category |
Exhaust, Exhaust |
| Clamping Type |
Flat Band |
| Clamps Included |
No |
| Clearance Category |
Exhaust |
| Color |
Raw/Bare, Silver |
| Country of Origin (Primary) |
US |
| Discount Percentage |
26-50% |
| Emission Code |
5, 5 |
| Exhaust Pipe Wall Max Gauge |
16 |
| Exhaust Pipe Wall Maximum Gauge |
16, 16 |
| Finish |
Natural, Natural |
| Gasket Or Seal Included |
No |
| Grade Type |
Performance |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No, No |
| Heat Shield Attached |
No |
| Heat Shield Included |
No |
| Inlet Attachment Type |
Clamp-On |
| Inlet Connection Type |
Slip-Fit, Slip-Fit |
| Inlet Diameter |
2.250 in., 2.25 |
| Inlet Diameter (in) |
2.25 |
| Inlet Inside Diameter |
2.12 |
| Inlet Type |
Clamp-On, Clamp-On |
| Life Cycle Status Code |
Available to Order |
| Main Piping Diameter |
2-1/4 |
| Material |
Stainless Steel, 409 Stainless Steel |
| Mount Type |
Yes, Yes |
| NAFTA Preference Criterion Code |
B |
| Outlet Attachment Type |
Clamp-On |
| Outlet Connection Type |
Slip-Fit, Slip-Fit |
| Outlet Diameter |
2.500 in., 2.50 |
| Outlet Diameter (in) |
2.5 |
| Outlet Inside Diameter |
2.37 |
| Overall Length |
47.000 in., 47.00 |
| Overall Length (In) |
47 |
| Overall Length (in.) |
47.000 in. |
| part type |
Exhaust X Pipe, Exhaust X Pipe |
| Pipe Diameter |
2.50 |
| Product Type |
Exhaust Accessories, Exhaust Accessories |
| Quantity |
1 |
| Sale Category |
Exhaust |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
Builder Accessories |
| Single Dual |
Dual, Dual |
| Single or Dual |
Dual |
| Sub Category |
Exhaust and Tail Pipes, Exhaust and Tail Pipes |
| Subcategory |
X-Pipes and Crossovers |
| System Type |
Exhaust Accessory, Exhaust Accessory |
| Tube Diameter |
2-1/4 inch, 2-1/4 |
| Universal Or Specific Fit |
Specific |
| Warning |
California Proposition 65, California Proposition 65 |
| Warranty Time |
12 |
| GTIN |
00700042032150 |
